Smart Projector Control

Put Control in the Palm of Your Hand

Key features

Power, Shutter, and OSD - The Control Screen comprises buttons to enable Power On/Standby, Shutter (AV Mute) Open/Close (On/Off), and OSD On/Off to show or hide the projector’s OSD menu on the projection screen, allowing settings navigation via the app’s

Input Selection - Select your desired input signal by tapping on the corresponding input shown on your device’s touchscreen. Smart Projector Control lists all inputs available on your projector model including optionally installed SLOT NX interface boards

Test Pattern Selection and Switching - Touch this button to display a selection of 15 test patterns that facilitate various types of projector calibration. You can select, switch, and clear test patterns with a tap on your device’s touchscreen.

Menu Screens - Switch between Operation Screen and Number Screen to control the projector using gestures familiar to anyone who has used a regular IR remote. Operation Screen features large arrow keys for easy navigation around the projector OSD, while th

Lens Adjustment Screen - Lens Adjustment Screen has three top buttons that access Lens Shift, Zoom, and Focus categories. Test Pattern, Lens Position, Memory Load/Delete, and Memory Save buttons are selectable from all three of these fields.

Compatibility Table

Large Venue

	RQ50K	RQ35K	RZ34K	RQ25K	RZ24K	RQ18K	RZ17K
Smart Projector Control	✓	✓	✓	✓	✓	✓	✓

Fixed Installation

REQ12

REQ10

REQ80

REZ12

REZ10

REZ80

RZ790

RZ690

MZ17KL

MZ14KL

MZ11KL

MZ880

MZ780

MZ680

Smart Projector Control

✓

An Intuitive Management and Control Solution for Your Projector

Smart Projector Control is a full-featured remote app for compatible iOS and Android devices that works with selected Panasonic laser projectors. You can configure, adjust, control, and monitor up to 64 registered projectors over Wi-Fi individually or simultaneously from your smartphone or tablet via a clean and responsive user interface. The app introduces a new NFC function that allows certain settings data to be read or written* when the projector is off. Other highlights include power on/off, input selection, lens adjustment, projector OSD navigation, test-pattern selection, status monitoring, and Auto Focus via compatible smartphone cameras.

^{Note: Some adjustment functions are unavailable when multiple projectors are selected, and compatibility with certain features may depend on the projector model and/or mobile device.}
^{When using this application software, update the software version to the latest one.}

Power, Shutter, and OSD

The Control Screen comprises buttons to enable Power On/Standby, Shutter (AV Mute) Open/Close (On/Off), and OSD On/Off to show or hide the projector’s OSD menu on the projection screen, allowing settings navigation via the app’s two operation screens.

Input Selection

Select your desired input signal by tapping on the corresponding input shown on your device’s touchscreen. Smart Projector Control lists all inputs available on your projector model including optionally installed SLOT NX interface boards.

^{Note: In some cases, the input name displayed on this menu may not correspond to the input terminal label on the projector.}

Test Pattern Selection and Switching

Touch this button to display a selection of 15 test patterns that facilitate various types of projector calibration. You can select, switch, and clear test patterns with a tap on your device’s touchscreen.

Menu Screens

Switch between Operation Screen and Number Screen to control the projector using gestures familiar to anyone who has used a regular IR remote. Operation Screen features large arrow keys for easy navigation around the projector OSD, while the Number Screen makes numeric entry more convenient. Arrow keys offer single-tap (single-step) or press-and-hold (continuous) actuation for slow or fast adjustment.

Lens Adjustment Screen

Lens Adjustment Screen has three top buttons that access Lens Shift, Zoom, and Focus categories. Test Pattern, Lens Position, Memory Load/Delete, and Memory Save buttons are selectable from all three of these fields. Numeric values for Vertical and Horizontal shift position, Zoom, and Focus can be manually entered, or previously saved lens-position data recalled using Memory Load/Delete function. You can also save current lens-position data for later recall. Tapping the Lens Setting icon, meanwhile, allows you to select your lens model from a list (this feature depends on the projector model). From here, calibration can be performed automatically and the lens returned to Home Position.

Status Information Screen

Status Screen presents a snapshot of the selected projector’s operation status including active input and input signal information as well as warnings for temperature, light source, and filter. Web Control button accesses Early Warning Software information for projectors registered to this optional Panasonic software, showing more granular analysis. OSD Capture lets you view and operate the projector’s OSD menus from your device’s web browser. Projectors with Multi-Monitoring & Control Software or Early Warning Software registered and Callout Function enabled support the display of the Early Warning Software interface on your device screen.

NFC Function

When setting up your projector prior to network connection, or when you want to view or modify settings without turning on the projector, NFC function presents a perfect solution. Simply hold your device against the NFC touchpoint on the projector to pair devices and gain read/write access to specific settings including network information and device ID data. Changes are reflected when the projector is turned on next time.

^{Note: Please refer to the}^{Web Manual}^{for supported models. Android interface shown. In some countries, projector activation is required to use NFC function. Please click}^here^{for a list of countries where an optional ET-NUK10 Upgrade Kit can be obtained to enable NFC function. For more information, please visit}^PASS^{. If NFC function is disabled, the app’s NFC screen is displayed, but reading/writing data is not possible. Requires iPhone 7 or later and iOS 11 or later. Also, iOS 13 or later is required to write the projector setting information. Supported NFC-ready Android devices must have NFC enabled before using NFC function.}

NFC Function Read/Write Information List

R: Readable　W: Writable

Data Name & Attribution	Android / iOS
PROJECTOR TYPE	R
SERIAL NUMBER	R
PROJECTOR RUNTIME	R
LIGHT 1 RUNTIME / LIGHT 2 RUNTIME	R
MAIN/SUB/NT VERSION	R
PROJECTOR ID	R/W
PROJECTOR NAME	R/W
ASSET NUMBER	R/W
DHCP	R/W
IP ADDRESS	R/W
SUBNET MASK	R/W
DEFAULT GATEWAY	R/W
MAC ADDRESS	R
(Crestron Connected Control System) IP ADDRESS	R/W
(Crestron Connected Control System) IPID	R/W
(Crestron Connected Control System) PORT	R/W
FACTORY RESET	R/W
LAST ERROR CODE	R/W*

_{* Last error code is not writable, but the error log can be cleared. See app instructions for more information.}

Auto Focus Function

To streamline projector setup, the lens focus position can be automatically adjusted using your device’s built-in camera. Auto Focus button opens an Auto Adjustment interface that accesses your device’s camera. After composing the projector screen inside the smartphone’s display, position the yellow frame inside the borders of the projection screen. You can designate camera zoom magnification and alter the range of focus by adjusting the size and position of the yellow frame with your fingers (requires a compatible device). The projector displays a test pattern during focus adjustment. Results are displayed numerically and can be saved.

^{Note: Auto Focus may not be compatible with some projector models and mobile devices. Please refer to the}^{Web Manual}^{for supported models. Operation with iPhone X, iPhone XS, iPhone XR, and Google Pixel 3 devices has been confirmed. Auto Focus cannot be performed when the projector’s OSD is displayed or when Custom Masking is set to ON. For further information on the Auto Focus function, please refer to the}^{Projector Operation}^{section of our Smart Projector Control instructional website.}

Trademark Notices

iTunes, iPad, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store and the App Store Logo are service marks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Android, Google Play, and Google Play Logo are trademarks or registered trademarks of Google LLC. Crestron Connected™ is a trademark of Crestron Electronics, Inc. Wi-Fi^® is a trademark of the Wi-Fi Alliance. Ricoh Bitmap Font is used in some on-screen menus, and is made and sold by Ricoh Co., Ltd. All other trademarks and registered trademarks are the property of their respective owners. The ® and ™ symbols are omitted on this webpage.

^{* Note that device screenshots shown in this section may vary from those displayed on your smartphone or tablet (depending on the projector model). App interface images shown here are from iPhone unless otherwise stated. Appearance may vary between Android devices and with the iPad.}

Example of system configuration

Control up to 64 projectors from your compatible mobile device. Projectors can be connected to the Wi-Fi network via LAN to a Wireless LAN Router/Access Point or Wireless LAN/Ethernet Converter. Selected projectors can also be connected using a compatible Panasonic Wi-Fi USB module.