LCD Projectors

PT-LAX35

Available from CY2026 Q3

Preliminary as of May 2026

Note: Release date and product availability may vary by country or region.

3,300 lm LCD XGA

View specifications Share page

Key features of PT-LAX35

Key features

Low-Maintenance Design for Long Term Use

Flexible Installation with Stable Image Adjustment

Flexible Connectivity for System Integration

Download brochure

PT-LAX45 SERIES LCD PROJECTORS
MODELS	PT-LAX35	PT-LAX40	PT-LAX45	PT-LAW44
LIGHT OUTPUT^{2, 3}	3,300 lm	3,800 lm	4,600 lm	4,300 lm
RESOLUTION	XGA (1024 x 786 pixels)	XGA (1024 x 786 pixels)	XGA (1024 x 786 pixels)	WXGA (1280 x 800 pixels)

_{Note: Model availability varies by country or region.}

_{1 When used in an environment with dust conditions of 0.15mg/m3 or less and the operating mode set to [ECO].}
_{2 Measurement, measuring conditions, and method of notation all comply with ISO21118:2020 international standards.}
_{3 [Picture mode] set to [Dynamic], [Light Power] set to [Normal].}

Low-Maintenance Design for Long Term Use

A long-life light source of up to 20,000 hours¹ enables stable, long-term operation. Reduced lamp replacement and maintenance help lower operational workload and total cost of ownership.

_{1 When used in an environment with dust conditions of 0.15mg/m3 or less and the operating mode set to [ECO].}

Long-life Lamp and Filter Minimize Maintenance

Breakthrough materials design paves the way for a new 20,000 - hour¹ lamp. Together with a long-life filter, the PT-LAX45 Series requires almost no maintenance.

_{1 Lamp life is approximately 20,000 hours in Eco Mode and approximately 10,000 hours in Normal/Quiet Mode. Replacement timing varies depending on operating environment and usage conditions.}

Flexible Connectivity for System Integration

A variety of interfaces enables seamless integration into meeting room and educational systems. Supports efficient operation through device connectivity and remote control.

Supports wide range of input types

A wide range of interfaces, including HDMI, VGA input, LAN, RS-232C, supports integration into various AV and control systems.

Flexible Installation with Stable Image Adjustment

Equipped with a 1.2x zoom lens and both vertical & horizontal keystone correction, offers flexible installation. It allows precise adjustments to achieve stable projection across a wide range of environments.

Optical zoom lens

Flexible 1.2x optical zoom supports wider installation distances and easy setup.

V/H Keystone Correction

Vertical/Horizontal keystone correction (±30°) helps square the image for quick, flexible setup.

Other Features

Light-weight and portable 3.1kg

Easy lamp and filter replacement with top and side access

USB memory viewer allows PC-less projection and presentation

Specifications of PT-LAX35

Specifications table

Projector type	LCD projectors
Display method	Transparent LCD panel (x 3, R/G/B)
Display Device -> Panel size	16.0 mm (0.63 in) diagonal (4:3 aspect ratio)
Display Device -> Number of pixels	786,432 (1024 x 768) x 3, total of 2,359,296 pixels
Light output^1^2	3,300 lm
Lamp	240 W x 1 lamp
Lamp replacement cycle -> NORMAL^*1	10,000 hours
Lamp replacement cycle -> ECO^*1	20,000 hours

View specifications Download specifications

Projector type	LCD projectors
Display method	Transparent LCD panel (x 3, R/G/B)
Display Device -> Panel size	16.0 mm (0.63 in) diagonal (4:3 aspect ratio)
Display Device -> Number of pixels	786,432 (1024 x 768) x 3, total of 2,359,296 pixels
Light output^1^2	3,300 lm
Lamp	240 W x 1 lamp
Lamp replacement cycle -> NORMAL^*1	10,000 hours
Lamp replacement cycle -> ECO^*1	20,000 hours
Resolution^*6	XGA (1024 x 768 pixels) (Input signals that exceed this resolution willbe converted to 1024 x 768 pixels)
Contrast Ratio (typ.)	15,000:1 (Iris: On)
Screen size (diagonal)	0.76 – 7.62 m (30–300 in), 4:3 aspect ratio
Center to Corner Uniformity^*2	80%
Lens	Manual zoom (1.2x), manual focus lens, F = 1.6 – 1.76, f = 19.1 – 23.0 mm
Lens shift -> Vertical(from center of screen)	ー
Lens shift -> Horizontal(from center of screen)	ー
Keystone correction range	Vertical: ±30 ° (Manual), Horizontal: ±30 ° (Manual)
Installation	Ceiling/floor, front/rear
Terminals -> HDMI^™ IN	HDMI 19P x 1, HDCP compatible, Deep Color compatible, Audio Signal: Linear PCM(Sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals -> COMPUTER IN（D-SUB 15pin）	D-sub HD 15-pin (female) x 1 [RGB]
Terminals -> AUDIO IN(M3 Stereo Mini Jack)	M3 (L,R) x 1
Terminals -> AUDIO OUT(M3 Stereo Mini Jack)	M3 (L,R) x 1 (Variable)
Terminals -> SERIAL IN	D-sub 9P (female) x 1 for external control (RS-232C compatible)
Terminals -> LAN	RJ-45 x 1 for network connection, 10Base-T/100Base-TX, PJLink^TM (Class 1) compatible
Terminals -> USB TYPE A	USB Type A [DC 5 V, MAX. 1A]
Power supply	AC 100 V–240 V, 50/60 Hz
Maximum power consumption^*13	335 W 235W [ECO]
Built-in speaker	5 W monaural
Cabinet materials	Molded plastic (PC)
Filter^*15	Yes
Estimated filter maintenance cycle	5,000 hours[NORMAL] 10,000 hours [ECO]
Operation noise -> Normal	38 dB [NORMAL]
Operation noise -> Eco	35 dB [ECO]
Dimensions (W x H x D)	345 x 99* x 261 mm (13 9/16˝ x 3 7/8˝* x 10 1/4˝)(*with legs at shortest position)
Weight^*16	Approx. 3.1 kg (6.8 lbs)
Operating environment -> Operating temperature^17^18	Normal use: 5–40 °C (41–104 °F) [at altitudes less than 1,400 m (4,593 ft)], 5–35 °C (41–95 °F) [at altitudes of 1,400–2,700 m (4,593–8,858 ft)]
Operating Environment -> Operating humidity (No condensation)	20 – 80 %
Footnote Description	Lamp replacement cycle stated is maximum value, at which time brightness will have decreased to 50%. Usage environment affects lamp replacement cycle. Measurement, measuring conditions, and method of notation all comply with ISO21118:2020 international standards . Filter cleaning cycle varies depending on environment. Filter can be washed and reused up to two times. Average value. May differ depending on the actual unit.